Heatless Desiccant Air Dryer Adsorption Air Drye Air Compressor

• Customization: Available
• Application Fields: Chemical
• Certification: ISO, CE
• Condition: New
• Noise Level: Low
• Parts: Adsorption Tower
• Purpose: Air Dryer
• Machine Size: Large
• Usage: Air Dryer
• Transport Package: The Wood Box
• Origin: Jiangsu, China
• HS Code: 841960909
• Production Capacity: 500sets/Years

Product Description

Model	Air handling capacity(Nm3/min)	Diffuser models	Interface size	Dimensions(mm)			Weight(KG)
				Length	Width	Height
SPXHAD-4	4.5	KS-40	G1-1/2"	1100	550	1710	160
SPXHAD-6	6.2	KS-40	G1-1/2"	1100	550	2080	350
SPXHAD-8	8.5	KS-50	G2"	1300	650	2110	430
SPXHAD-10	11	KS-50	G2"	1300	650	2110	460
SPXHAD-13	13.5	KS-50	G2"	1350	700	2150	520
SPXHAD-15	17	KS-65	DN65	1350	750	2270	720
SPXHAD-20	22	KS-65	DN65	1400	750	2285	890
SPXHAD-25	27	KS-80	DN80	1450	750	2545	950
SPXHAD-30	32	KS-80	DN80	1450	775	2555	1320
SPXHAD-40	42	KS-100	DN100	1700	925	2595	1550
SPXHAD-50	50	KS-100	DN100	1800	950	2700	1800
SPXHAD-60	65	KS-100	DN100	1850	975	2700	2250
SPXHAD-80	85	KS-125	DN125	2100	1030	2810	2810
SPXHAD-100	110	KS-150	DN150	2600	1200	3020	4150
SPXHAD-130	140	KS-150	DN150	2700	1200	3030	4980
SPXHAD-150	160	KS-200	DN200	2950	1400	3250	6250
SPXHAD-180	185	KS-200	DN200	3250	1450	3450	6460
SPXHAD-200	210	KS-200	DN200	3600	1600	3500	7280
SPXHAD-230	240	KS-200	DN200	3700	1700	3600	8520
SPXHAD-250	260	KS-200	DN200	4000	1800	3800	9360

Product principle introduction:|
The heatless adsorption dryer uses the principle of variable pressure adsorption to enable the dryer to adsorb under the pressure of the pipe network, then desorb under the switch to atmospheric pressure and draw back about 12-14% of the dried finished gas from the dryer outlet for further purification and regeneration of the desiccant. The two towers alternate the above process to provide dry compressed air to the point of use.

Standard technical parameters:
1.Rated inlet air temperature: ≤40ºC
2.Rated working pressure: 0.6-1.0Mpa
3. Ambient temperature: ≤45ºC
4. Air dew point: -40ºC (0.7MPa) (-60ºC or below can be customized)
5.Regeneration air consumption: 12-14%
6. Pressure loss: ≤0.02MPa
7. Oil content of inlet air: <0.1mg/m³
8. Installation: indoor, no foundation, concrete floor levelling, space reserved for maintenance operation
9. Adsorbent: activated alumina, molecular sieve
10. Power supply: 220-1PH-50HZ
11. Users can selectively configure customized products
Consult our technical service department for detailed technical parameters


Design features:
1. Short cycle adsorption cycle, isothermal operation, preservation of adsorption heat, good natural desorption effect
2. Full electronic programmable controller, friendly human-machine interface, automatic continuous display of double tower working conditions
3. Regeneration throttle plate technology, effective control of regeneration flow
4. Accurate action, stable performance, easy to operate
5. Professional anti-rust treatment on the inner wall of the cylinder, 10 years without rust and corrosion
6. Stainless steel diffuser is corrosion-resistant, wear-resistant and durable
6. Stainless steel valves work stably, valve life up to 500,000 times action
7. Preferred valve form to ensure the feasibility and convenience of on-site maintenance and replacement
8. Large flow silencer, lower back pressure, silencer and exhaust channel without the concern of condensation
9. Frequency conversion with delayed adsorption technology for more energy saving (optional)